cdn.pintosgatemotors.co.za Open in urlscan Pro
192.64.78.5  Public Scan

Form analysis
0 forms found in the DOM

Text Content

 * HOME
 * GATE XPERTS
 * SERVICES
   * FOR SALE
   * INSTALLATIONS
   * REPAIRS
 * BRANDS
 * CONTACT US

 * HOME
 * GATE XPERTS
 * SERVICES
   * FOR SALE
   * INSTALLATIONS
   * REPAIRS
 * BRANDS
 * CONTACT US


GATE MOTORS DURBAN ↚ ☏ 074-035-3113


SLIDING GATE MOTOR REPAIRS DURBAN

Sliding Gate Motor Repairs Durban and installations for sliding gates are allot
cheaper than swing gates since you are only dealing with one gate motor.They are
also very easy to maintain and tend to break less frequently than their sister
the swing gate motor. Sliding gate motors in Durban tend to stop operating or
they bump hard into the stoper. Other common problems with sliding gates is the
wheels and the PC board. It’s important to install gate motors correctly so that
they’ll last the longest amount of time if they’re not running smoothly.




COMMON SLIDING GATE MOTOR PROBLEMS IN DURBAN

 * Motor beeps but does not move.
 * Gate makes a squeaking sound.
 * The gate motor running slowly.
 * If the gate is closed, it can be lifted.
 * The gate wheels and rollers stopped moving.
 * Gate motor runs bumps into stoppers
 * The gate was very heavy.
 * Having difficulty moving the gate.


DURBAN GATE MOTORS


QUALITY GATE AUTOMATION AT WHOLESALE PRICES CALL 074-035-3113 FOR ASSISTANCE

Gate Motors Durban, your local gate automation and security specialist. For help
with sales, service or support. With Gate Motors Durban you get after-sales
support. Fast response times and same day service. Plus the lowest prices on
Gate Openers in Durban. Our qualified and experienced staff, know what they are
doing. They will help you to make the right decision when choosing a swing or
sliding gate motor.

All of our installations and Gate Motor Repairs in Durban are guaranteed because
of our staff’s experience and training. The service technicians at Gate Xperts
Gate Motors Durban can fix gate motors on-site. You don’t have to schedule an
appointment to have any gate motor serviced. The services we offer include
Garage Doors, Automation, Garage Door Spring Replacements, Roller Shutter Doors,
Garage Door Motors, Repairs, and Maintenance.




SWING GATE MOTOR REPAIRS DURBAN

Swing Gate Motor Repairs  and installations are usually quite costly since you
are working with two gates. Even if you only have one swing gate, your
controller is designed for the operation of two gates. Therefore, the cost to
operate two motors is always high. The most common reasons for swing gate repair
is a sagging gate or hinges that are loose, or the mounting points pulling away
from the wall, which results in a gate that does not open or close properly.
Make sure that your swing gates are installed correctly in order to ensure that
the motors last as long as possible. If the swing gates are not running
smoothly, they can cause major damage to the motor.




COMMON SWING GATE MOTOR PROBLEMS IN DURBAN

 * Hits an open or closed point.
 * The motor is not moving.
 * The gate seems to be stuck.
 * Slowly running.
 * Just one gate moves.
 * They do not disengage.
 * Refuses to set a limit.
 * The gate isn’t aligned properly.




RACK & PINION INSTALLATIONS

Gate motor installations and positions move over time, so also make sure that
your motor is at 100% level. Ensure that the gate motor is, mounted on a deep
routed, and strong cement foundation. Ensure that the gate motor is securely
installed and welded in place. Including the holding nuts. Make sure that your
motor base plate is, supported. By drilling into the concrete foundation and
knocking 10mm metal rods. At least 30cm into the cement. However before knocking
the rods into the holes. Pour bonding liquid into the holes and then insert the
rods. Make sure to Firmly weld onto your gate pillars for extra strength and
support.

Make certain that the tooth rail is securely attached to the gate frame and
cannot be, removed. If you have the steel gate rail or the nylon rail. Make sure
that the distance between the cog wheel and the tooth rail is 1mm. Make sure
that there is not to much downward pressure from the teeth rack onto the pinion
cog. Make sure that all the welded angle brackets are, spaced at least 30 cm
apart and are welding firmly. If you are using a nylon tooth rail, it is always
better to add extra tex screws for added security.


GATE WHEEL INSTALLATION AND MAINTENANCE

The correct wheel size as well as the correct wheel alignment. (Where the wheels
are, positioned on your gate) are important. Damaged or rusty wheels play a huge
and important role. In the operation of your gate motor and it’s performance.
The correct wheel size will impact how your gate motor operates. It will also
ensure the long-term well-being of your gate motor. As there is less strain
placed on the actual gearbox and motor.

If your gate is, made of heavy metal or wood in, excess of 200kg and is
operating with either a 40mm or 60mm wheel size. Your gate motor will work
harder than normal. Not only will your gate operation be slow. But your motor
will be experiencing abnormal wear and tear on all moving parts. As well as on
your gear box oil seals and bearings. Upgrading your wheels to atleast 80mm for
gates with a weight of 500kg to 800kg is advisable. It’s always advisable to
replace your gate wheels if you are installing a new gate motor.