forcenylon5.xtgem.com Open in urlscan Pro
54.36.158.42  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Tags: powder coat los angeles Los Angeles powder coating


THINGS ABOUT PENINSULA POWDER COATING: HOME

Powder Coat Candy Colors and Get Professional Results


Galvanized Steel with a Powder-Coated Surface




NOT KNOWN DETAILS ABOUT BOROTEK POWDER COATING - MIDDLE TENNESSEE'S POWDER



The base for this procedure is conventional photo copier technology. It is
currently in use in some covering applications and looks appealing for
industrial powder finish on flat substrates (steel, aluminium, MDF, paper,
board) as well as in sheet to sheet and/or roll to roll processes. This
procedure can potentially be integrated in an existing coating line.


This cure procedure, called crosslinking, requires a particular temperature for
a certain length of time in order to reach full treatment and establish the
complete film homes for which the product was created. Architecture of the
polyester resin and type of curing agent have significant effect on
crosslinking. Common (Usually the) powders cure at 200 C (390 F)/ object
temperature level for 10 minutes, in European- and Asian market a curing
schedule of 180 C (356 F) for 10 minutes has been industrial standard for years
however is nowadays shifting towards a temperature level of 160 C (320 F) at
same curing time.


160 C (320 F). The low bake technique results in energy cost savings
specifically in cases where covering of enormous parts are task of the finishing
operation. The total oven residence time requires to be just 18-19 min to
entirely treat the reactive powder at 180 C (356 F). Read This for all low bake
systems is to optimize at the same time reactivity, drain (aspect of the powder
film) and storage stability.



WHAT DOES POWDER COATING TECHNOLOGY: QUALITY METAL FINISHING MEAN?



HAA polyesters tend to overbake yellow more so than TGIC polyesters. The
treating schedule might differ according to the manufacturer's specifications.
The application of energy to the item to be treated can be accomplished by
convection treatment ovens, infrared treatment ovens, or by laser curing
procedure. The latter demonstrates considerable reduction of treating time.



This finishing technology needs less heat energy and cures substantially faster
than thermally-cured powder coatings. Typical oven dwell times for UV curable
powder coverings are 12 minutes with temperature levels of the covering reaching
110-130 C. Making use of UV LED curing systems, which are extremely energy
effective and do not create IR energy from the light head, make UV-cured powder
coating much more desirable for completing a range of heat-sensitive products
and assemblies.


Created at 2021-10-20 14:58
0 Star
Back to posts
This post has no comments - be the first one!

UNDER MAINTENANCE

Duck hunt»