zamet.pol-agro.eu Open in urlscan Pro
91.211.222.228  Public Scan

Form analysis
0 forms found in the DOM

Text Content

 * EN
 * PL
 * DE
 * SE
 * IT
 * ES
 * FR
 * CZ
 * SK
 * LT
 * LV
 * RO
 * HU
 * GE
 * RU
 * BY
 * UA
 * KZ
 * FI
 * DK
 * AE
 * NL
 * AT

MORE INFORMATION: ZAMET.SLUPNO@WP.PL

 * 
 * 








ZAMET - AGRICULTURAL MACHINERY: PILES OF MOUNDS, GRASS CUTTER - POLAND


FEED WAGON FIDER

Dane techniczne:

CAPACITY 7 m3 8 m3 9 m3 10 m3 11 m3 12 m3 Overall height* 225 cm 242 cm 258 cm
273 cm 288 cm 303 cm Overall width* 230 cm 230 cm 230 cm 230 cm 230 cm 230 cm
Power demand* from 30kW from 30kW 40 kW 40 kW from 50kW from 50kW Tires
10.5/75-15.3 10.5/75-15.3 10.5/75-15.3 10.5/75-15.3 10.5/75-15.3 10.5/75-15.3
Drive WOM 540 obr/min 540 obr/min 540 obr/min 540 obr/min 540 obr/min 540
obr/min Number of hydraulic outputs 2 2 2 2 2 2 Min.Oil pump flow 25l/min
25l/min 25l/min 25l/min 25l/min 25l/min

Standard equipment of the machine:

Tires 10.0/75-15.3 Electronic weighing system based on four sensors Two-speed
gearbox 1:1/1,94:1 Transverse floor conveyor based on a PVC belt PTO shaft
Inspection platform Mechanically adjustable support foot Safety ring to prevent
the forage from falling out Knife supporting the dumping Wheel chocks Laser
sharpened knives on the auger (hardened)

It is possible to make the machine according to individual needs!!!
*The manufacturer reserves the right to change the specification, type and
dimensions without prior notice.


MOUND-STACKER P - 427

The stacker is a machine mounted on the tractor's three-point linkage. The
machine is used for mechanical forming of silage piles and storage mounds. The
machine has an adjustable working depth and adjustable backfilling distances. It
is designed to work on a stone-free surface.

Technical data:
length 75 cm, width 150 cm, weight 360 kg, power requirement 40 kW.


GREEN FODDER CUTTER T - 635

is a machine attached to the tractor on its upper transport hitch and intended
for single-stage harvesting of low-stemmed plants, intended for direct feeding.
Due to the use of a chain reel in the cutter, the harvested forage does not
mechanically damage the harvested fodder and thus remains fresh after unloading
and is eagerly eaten by cattle. The forage cutter is a combination of a rotary
mower with a forage wagon. The cutter is controlled by a four-section hydraulic
distributor mounted on an adjustable bracket.

The manifold enables independent control of:
- the height of the mower
- setting the drawbar in transport or working position
- regulation of the speed of the floor conveyor
- including or only the movement of the floor conveyor

The cutter can be used for single-phase harvesting of herbs (for drying) and
green parts of vegetables.

Technical data:
- length - 630 cm
- width - 210 cm
- working width - 185 cm
- working height - 250 cm
- transport height - 195 cm
- box capacity - 14.5 m3
- power demand above - 30 kW
- machine weight - 1950 kg
- load capacity - 3200 kg
- Tires - 11.5 / 80-15.3.1 12PR
- PTO drive 540 rpm
- upper transport semi-trailer with a minimum pressure of 800 kg
- two hydraulic outputs of the tractor
- oil pump on 25 l / min

The T-635 forage cutter has a CE declaration of conformity

It is equipped with:
- road wheel chocks
- transport line
- drive shafts

The sides of the load box are made of trapezoidal galvanized sheet and its floor
is made of specially profiled steel sheet. For the construction of the floor
conveyor, a chain, socket wheels and guide wheels, similar to those in manure
spreaders, were used. the chain used in round balers was used to build the chain
reel.


GREEN FODDER CUTTER T-635/1

is a machine attached to the tractor on its upper transport hitch and intended
for single-stage harvesting of low-stemmed plants, intended for direct feeding.
Due to the use of a chain reel in the cutter, the harvested forage does not
mechanically damage the harvested fodder and thus remains fresh after unloading
and is eagerly eaten by cattle. The forage cutter is a combination of a rotary
mower with a self-collecting trailer. The cutter is controlled by a four-section
hydraulic distributor mounted on an adjustable bracket. The machine in the
"compacted" reel version is used for harvesting herbs and green parts of
vegetables.

The manifold enables independent control of:
- the height of the mower
- setting the drawbar in transport or working position
- regulation of the speed of the floor conveyor
- including or only the movement of the floor conveyor

Technical data:
- length - 700 cm
- width - 220 cm
- working width - 185 cm
- working height - 250 cm
- transport height - 195 cm
- box capacity - 19 m3
- power demand above - 50 kW
- machine weight - 2150 kg
- load capacity - 5000 kg
- Tires - 400 / 80-15.3.1 12PR
- PTO drive 540 rpm
- upper transport semi-trailer with a minimum pressure of 800 kg
- two hydraulic outputs of the tractor
- oil pump on 25 l / min


GREEN FODDER CUTTER T-635/3

is a machine attached to the tractor on its lower transport hitch and intended
for single-stage harvesting of low-stemmed plants, intended for direct feeding.
Due to the use of a chain reel in the cutter, the harvested forage does not
mechanically damage the harvested fodder and thus remains fresh after unloading
and is eagerly eaten by cattle. The forage cutter is a combination of a rotary
mower with a forage wagon. The cutter is controlled by a four-section hydraulic
distributor mounted on an adjustable bracket. The machine in the compacted reel
version is used for harvesting herbs and green parts of vegetables

The manifold enables independent control of:
◦ the height of the mower
◦ setting the drawbar in transport or working position
◦ enabling or disabling the floor conveyor movement
◦ engaging or disengaging the mower's clutch
◦ opening or closing the tailgate

Technical data:
- length - 850 cm
- width - 230 cm
- working width - 185 cm
- working height - 275 cm
- transport height - 275 cm
- box capacity - 24 m3
- power demand above - 60 kW
- machine weight - 3160 kg
- load capacity - 8,000 kg
- Tires - 400 / 60-15.5
- PTO drive 540 rpm
- lower transport hitch with a minimum pressure of 1300 kg
- two hydraulic outputs of the tractor
- oil pump on 40 l / min


 


GALLERY




CONTACT INFORMATION

„ZAMET” Zabielski Sp.J.
09-470 Bodzanów | Łagiewniki 45 | Polska-Mazowieckie
+48 24 386 27 51, +48 505 956 035
zamet.slupno@wp.pl   www.zamet.org.pl
 sites.google.com/view/polagro-zamet




LOCATION


Implementation: aktru.pl author of the portal polfirms.ru | sitemap

aktru.business.site


Strona korzysta z plików cookie w celu realizacji usług zgodnie z Polityką
prywatności.

Możesz określić warunki przechowywania lub dostępu do cookie w Twojej
przeglądarce lub konfiguracji usługi.

Zamknij

word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word

mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1