www.diigo.com Open in urlscan Pro
54.148.192.94  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Skip to main contentdfsdf

 * Tools

 * Sign in


/ vendelbowu18's Library/ Notes/ The Single Strategy To Use For how to cut
laminate countertop in place - Dental Business


THE SINGLE STRATEGY TO USE FOR HOW TO CUT LAMINATE COUNTERTOP IN PLACE - DENTAL
BUSINESS

The Single Strategy To Use For how to cut laminate countertop in place - Dental
Business

from web site

painting formica countertops laminate countertop


AN UNBIASED VIEW OF HOW TO CUT BACK A LAMINATE COUNTERTOP SO I CAN INSTALL A




By Jeff Sawyer on January 28, 2010 Plastic laminate countertops are affordable,
resilient, easy to clean, been available in a variety of designs, and finest of
all are relatively simple to install yourself. Here are some suggestions on how
to cut a laminate counter to fit your need. Tools You will desire to collect the
following items: Jigsaw (saber saw) with a "down cut" blade minimum of 10
teeth/inch Circular saw with a thin kerf (space left by cut of blade) carbide
blade with 60 teeth Sanding block/Belt sander with 220 grit sandpaper Portable
drill As always, eye protection Cutting to Fit You can purchase laminate counter
tops in stock sizes that come in 2 foot periods in between 4 and 12 feet.


How To Cut Formica Countertop Already Installed - HomVela



But worry not, cutting the counter to fit is not a terribly difficult task. As a
matter of fact, rather typically the retailer will have end trim pieces of
matching laminate to glue on after you make a cut. Here are the steps to get a
tidy cut off of your counter.


How to cut laminate countertop and what circular saw blade to use



Adhere a strip of masking tape on the counter where your cut will be to secure
the laminate from breaking. Lay blogspot.com of masking tape so the shoe to your
saw will rest on the two strips of tape and secure the counter from being
scratched. With a carpenter's square mark your cutting line onto the very first
piece of masking tape.


You will wish to secure a 12 to utilize as a rip fence. Use this measurement so
that the saw rests versus the fence and the blade is associated your mark. add
1/16th of an inch to your measurement so that your cut is in fact a little large
of the mark.



SEE THIS REPORT ABOUT CUTTING OFF FORMICA PLASTIC LAMINATE COUNTERTOPS IN PLACE



Set the depth of your blade to 1/8th inch much deeper than the thickest part of
the counter. Always get the blade approximately full speed prior to starting
your cut. Another suggestion is to do a practice cut into the waste side of the
counter so you can get a feel for it.




Saved by vendelbowu18

26 minutes ago


 * ©2021 Diigo, Inc.
 * About
 * Pricing & Plans
 * Terms of Service
 * Privacy Policy
   
 * Blog
 * Twitter
 * Contact Us