arcanacreations.blogspot.com Open in urlscan Pro
2a00:1450:4001:82f::2001  Public Scan

Form analysis
0 forms found in the DOM

Text Content

WHAT I'M BACKING ON KICKSTARTER:


After Winter Dark Campaign Setting



MONDAY, FEBRUARY 13, 2023


THE WRITING'S ON THE WALL



It's been four years (to the day) since I last wrote something on this blog. 
It's been a weird and interesting trip.  Here's the cliffsnotes version:

In late 2018, I launched a successful Kickstarter for my Ballista line of gaming
supplements.  Up to that point, Arcana Creations had started stepping up
production both in terms of gaming material as well as launching our Arcana
Elements imprint that did fiction and non-fiction books.  We were also
increasing our exposure via in person shows and conventions.  Things were good!

In 2019, things got busier and since I also have a full time job, the first
casualty of my busy schedule was this very blog. The shows were a greater
success, fulfillment of the KS was finished, and we were doing more projects. We
even signed on to help another indie-publisher to take a project off their hands
in order to rewrite, do layout, and publish a small RPG title for them!  Things
were looking up and 2020 was going to be a FANTASTIC year.

2020 was fantastic alright... fantastically bad.

Licensed by Louis Porter, Jr. Design

Covid hit and impacted the world and pretty much shut everything down in its
tracks. Any momentum and growth we had was essentially lost with the pandemic.
Plans to try and direct the flow of traffic from shows to an online store never
happened. Everything got put on hold.

2021 wasn't much better and I lost my father at the start of that year. Having
taken a year off due to the pandemic, I decided to start publishing things
regardless but I wasn't in the headspace for it. We managed to publish two
novels that year and started doing shows towards the end of that year as things
were opening up more and more.

Realizing that the momentum Arcana Creations had eroded in 2020 and 2021, I
increased the shows in 2022 but my circumstances changed once again and
effectively, our base of operations moved from Montreal to a small hamlet about
a couple outside of Montreal in the Eastern Townships.  We bought an OLD house
which gives me the space I needed but the tradeoff was the amount of work that
we had (and still need) to do for it.  The second half of 2022 has been
predominated by the purchase, move, and basic renos.

At the start of 2023, things are looking GOOD again.  Creatively speaking, I've
gotten my spark back. I have have clearer picture of various objectives I want
to pursue this year. Most importantly, a variety of projects that got stuck in
limbo were becoming unstuck.

And then, Wizards of the Coast basically shit the bed.

While a lot of things have since been sorted out, the repercussions will be long
felt for the tabletop industry. Some of my prior publications and current
projects are being re-worked to avoid any future entanglements but I'm equally
excited to do so.  I won't go into too much detail about that whole OGL drama
here but it's given me another kick in the pants with regards to some of my
projects.

All that said, the past 4 years have given me some perspective on where I want
to take Arcana Creations as well as what is feasible and practical to do.  I've
taken a couple steps back in order to move forward again and it seems right that
I go back and start writing here again.  I'm also been talking to another friend
in the publishing space about partnering up and doing some joint projects
together -- just like I did when I started out back in 2009.







M





Posted by Moriarty777 at 3:51 PM No comments:
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest




WEDNESDAY, FEBRUARY 13, 2019


BOARD GAME OVERLOAD!




As a kid growing up, I liked playing board games and cards. Up to the age of 12
or 13, most of this sort of gaming was confined to the likes of Monopoly,
Stratego, and Risk. Then one X-Mas back in 1989, I received a copy of Axis &
Allies and I marveled at the complexity of the game. There were so many
different components and what seemed to be a large game board! I loved it and I
equally enjoyed Shogun (also a Milton Bradley game) that another one of my
friends had.

At that age, I had also started playing D&D. Because of this, Axis & Allies was
pulled out 'once in a while' and really, all board games ended up sharing that
fate. Things pretty much remained that way for years afterwards. If it wasn't
D&D, it was another tabletop RPG.

About 10-15 years ago, I ended up getting roped in to play this game called
Settlers of Catan along with few other board games that I had never heard of
before. As it turns out, this was the beginning of some sort of board game
renaissance! The tipping point for me was a game called 'Antike'. It is sort of
a board game equivalent of Civilization were you compete against other ancient
cultures for dominance. It is not overly complex but it isn't a game reliant on
a 'luck mechanic' (as in dice or cards) either.

On my next trip to Montreal (I had been living a couple hours away at the time),
I picked up a copy for myself, along with what looked to be a fun Tile-Based
game called Drakon. My actual move to Montreal came less than a year later and
once there, I made some new friends. I was introduced to (and acquired) games
like Ticket to Ride, Shadows Over Camelot, Citadels, and a few others. Somewhat
wisely, I decided to try and avoid games that were too alike in terms of game
play and mechanics. Yet somehow, that didn't help much.

I remember a year or so into my new board gaming habit, Fantasy Flight was doing
some sort of X-Mas promotion were I could get some games for $5 USD each plus
what was almost reasonable shipping charges (BOY have things changed). The
Canadian / US exchange rate was also a lot more favorable back then than it is
now so it didn't take too long to acquire a bunch of new games in one fell
swoop! I also was constantly on the look out for other deals and sales and I
picked up quite a few other games that way. With all of that, plus the ever
growing expansions for some games, it didn't take long for the cabinet that held
my games to start overflowing.

The acquisition of all these games weren't the problem though...Finding the time
to play them given everything else I had going on was. We had a couple of
friends we routinely played various board games with -- almost on a weekly
basis. But they had their own games and between us we had favorites that we kept
revisiting. This meant there were some games that we have collectively owned for
years and have never played!

I decided on a 3-point course of action: I decided at that point to greatly
reduce the the rate at which I acquired games. I decided to try and focus on the
ones I already had. And finally, I decided to try and sell some of the ones that
I could do with out. Selling these off is harder than it should be because
people want to spend as little as possible and because shipping isn't cheap! I
did manage to part with a few that I knew wouldn't get played ever again for one
reason or another.

For a few years, things were good. I rarely picked up a new board game as I
didn't see the need. Sure, I had other things to sink cash into and, despite
being a fan of various Kickstarter projects, I backed only TWO small board games
in six years! That said, something happened in 2018 and I ended up backing SEVEN
board game related projects last year. These have started coming in last Fall.
Three of them are BIG ONES too and I need to find places for all these games
soon. I also probably need to purge some older un-played or disliked titles --
even if I have to give them away!

I love board games and the social aspects of some of these games. I just don't
have the time to play all of them and I don't think I ever will. The friends I
mentioned earlier? They've reached the same conclusion. For myself, I think I
need to refine the criteria for keeping games in my collection.

This gaming renaissance that we've been experiencing for the past ten years?
Maybe those days are numbered as we all become collectively buried by the newest
fantastic game. Kickstarter has certainly been a driving force for this too.
Crowdfunding has both been a blessing and a curse and while it has allowed for
many games to be made that wouldn't have been published otherwise. It also means
many games will just come and go as dedicated board gamers just move on from
game board to game board.


M

Posted by Moriarty777 at 9:12 PM No comments:
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest




WEDNESDAY, FEBRUARY 6, 2019


WHERE THE GROUND CRUMBLES BEFORE ME...





Whelp... Getting traction on a blog can be challenging. Over the years, I've
seen ups and downs.

Now as part of Google's shut down of G+, the first steps of separating the
interconnectedness of things have been taken. I've always enjoying navigating
Google Plus even if it wasn't a popular platform, it became one adored by many
gamers such as myself. It was also an easy way to get people to glance at my odd
musings on the blog.

Without it, I'm not sure how well it will fair but I hope it remains steady.

Guess I may have to share this on Twitter and Facebook more or consider other
options.

M

Posted by Moriarty777 at 10:24 PM No comments:
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest




SUNDAY, JANUARY 27, 2019


3D PRINTING & SCI-FI OUTPOSTS




I have two 3D Printers at present -- a Prusa i3 Mk3 which I've owned since
Spring of 2018 and a Creality Ender 3 which I put together during the holidays.
Both have been working at printing up some goodies like some great terrain
pieces I'm planning to use for Kill Team. Working with the Ender 3 has been a
different experience than my Mk3. Let me say that I *love* the reliability of my
Mk3 and it has printed countless of hours with a success rate (out of the box)
of over 96%

When I bought my Mk3, it wasn't cheap. Because I needed to put it into
production almost immediately and because I didn't want any possible downtime
putting it together and dialing it in, I chose a fully assembled model. That
cost me $999 USD plus and additional $100 USD in shipping. On top of that, there
was customs charges. After the USD to CAD exchange rate, it was no small
investment. Given what I got out of it, I don't regret the purchase and I would
love to have another.

Realistically, this was not in the budget.

A newer printer (which wasn't on my radar when I initially bought the Mk3) was,
and this was Creality's newest offering -- the Ender 3. As I mentioned recently,
I managed to pick it up with a flash sale on Amazon making it already cheaper
than it normally is (a little over $200 USD). In truth, I wanted to have a
second 3D printer for a while but I held off on the Ender 3 for a few reasons:


 * Unlike the Mk3, the Ender 3 is not use a direct drive extruder but a bowden
   tube setup.
 * The Ender 3 is has had thermal runaway protection disabled
 * No automated bed leveling
 * Issues with various parts due to cost-cutting measure
 * Frame is in separate pieces in the kit

The Mk3 has spoiled me in many ways but no printer is quite at the consumer
level where you can press a button and 'go'. But I feel the Mk3 does get pretty
close to this level of ease. It was a bit different when it comes to the Ender
3. As a kit, the Ender 3 isn't too difficult to put together but invariably,
there will be issues if you aren't careful when assembling the printer as you
need to make sure the frame is perfectly squared to the bed. Just a tiny
variance can affect the quality of the print, even if it 'looks' straight. Some
of the pieces used are a bit on the sub-standard side and some choices boggle
the mind. The extruder in the kit is plastic and wear and tear is a valid
concern. The bed is frequently warped which makes bed leveling a problem of
course and, since you have to manually do this, it can be a frustrating start
into the 3D printing hobby.

The biggest one for me was the issue with thermal runaway protection having been
disabled for many of these earlier printers. Fortunately, this is ONE thing that
has changed recently. Newer Ender 3's have been going out with this enabled.
Experiencing thermal runaway when this is disabled is a sure way to get a fire
happening and NO ONE wants that!

With the price being even lower than usual, I was able to order the Ender 3 as
well as get a glass bed to resolve the possibility of the bed being warped and a
metal extruder to replace the stock plastic one. At that price, it would have
been possible to buy FOUR Ender 3's for the cost of my Mk3.

With that cost savings, there is a trade-off when it comes to convenience.
Dialing in the Ender 3 seems more of an art than anything else sometimes and if
it wasn't for previous experience, it might have taken me much longer to do. For
the newcomer to 3D Printing, I'd would be happy to recommend the investment but
I'd also stipulate that they need to sit through a lot of videos in terms of
properly assembling one of these kits and how to properly set up the printer for
optimal use.

BOTH of my printers are configured as they should be and right now I'm printing
some Sci-Fi terrain. As it turns out, this isn't only for me -- a friend asked
me to print up some pieces to replace his Space Hulk cardboard tiles. I've
printed a couple of test pieces and I'm liking how they look so far:





The terrain is part of a larger set which I stumbled upon Kickstarter a few
months back called Outpost: Origins by Dragon's Rest. The models are extremely
detailed and look fantastic! They were also great value given the price on
Kickstarter though looking at their website, not everything that has been
released to backers is available for purchase yet. I assume they will come when
all pieces have been made available.

At this stage, I'm printing various pieces for different configurations. The
first two (the red and silver) were only the beginning as I am looking to see
how closely I can match the Space Hulk maps for tabletop play. Worse case...
these are going to become part of terrain for Kill Team.  ;)

M

Posted by Moriarty777 at 11:17 PM No comments:
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest




SUNDAY, JANUARY 20, 2019


OPERATION: KILL TEAM




Well, there are two things that have recently happened that I'm tying together.
Sometime back in August, I picked up the new Kill Team rulebook that was
released by Games Workshop. Long time readers of the blog may recall that I've
skirted the line with their company and their products before. Frankly, the
frustrate me to no end and their business practices did have me cash out of 40K
about a year after I got into it. One of the reasons I got into some of their
stuff in the first place was because it was one of the Lord of the Rings kits
that got me started into painting miniatures. For the record, it was a pack of
Goblins of Moria. Their prices have also increased in the past couple of years
and, in my opinion, some of their stuff is just too damned expensive.

Kill Team is a different beast entirely though. The investment you need is
relatively small compared to other product lines they carry. Better yet, if you
are someone who is a fan of Warhammer 40K, it gives you an inexpensive
opportunity to play with other units outside of the usual army you happen to be
fielding for your games at the time. I picked up the book and, while I still had
some odds and ends to put together a Kill Team without spending another dollar,
I chose to pick up something I wanted to try out and play -- the Tau.

Outside the Rulebook, the game doesn't need to cost you that much to play. The
Core Rulebook is $40 USD where-as a team will typically cost you in the $30 -
$60 USD range. Aside from terrain to game on, you actually don't need much of
anything else to pay. Naturally there are plenty of ways to spend more money
including boxed 'Kill Zones' which essentially give you terrain to play with but
not all that necessary if you already have some or prefer to make your own!

The Tau happened to be inexpensive for me and I've always like the look of these
units. I started painting my units (a non-standard scheme) towards the end of
August. They still aren't finished and I haven't touched since the end of August
either.

When it comes to terrain, I have chosen to print my own terrain. I have a Prusa
Mk3 which has been in steady use since May of last year and, less than a month
ago, I assembled a new printer. This was a far more economical option as I took
advantage of an Amazon Prime Flash Sale and picked up an Ender 3 by Creality. It
still needs a bit of work but it is printing well enough and I'm getting decent
prints off of it. With the two printers now working, I've started printing
pieces to make my own set of terrain to use in Kill Team.

First and foremost, I've been printing some sci-fi crates I found on
Thingiverse:




https://www.thingiverse.com/thing:1545267

I've got three printed now and I'm printing a variant with no doors. I also
printed a whole bunch of these (they also served as some test prints for the new
Ender 3):





https://www.thingiverse.com/thing:2574636

But I'm also planning on printing a bunch of these for the terrain:




https://www.thingiverse.com/thing:3059434

With some crates, barrels, scaffolding, and a couple other odds and ends, I
think I've got the beginnings of something solid for terrain to do a few Kill
Team matches on. Still a bit of printing to do and I'm going to consider a few
more things to print to fill out a good sized area but, while some of this stuff
is printing, I'm hoping to finally get back to and finish painting my Kill Team
stuff during the course of the next few weeks.

M



Posted by Moriarty777 at 9:14 PM No comments:
Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest


Older Posts Home

Subscribe to: Posts (Atom)






ABOUT ME

Moriarty777 Kingsbury, QC, Canada My name is Pat Bellavance, and I've been
involved in the tabletop hobby since the 80's. I love history, literature, and
the esoteric and blend these into the stories I help shape and create. View my
complete profile



BLOG ARCHIVE

 * ▼  2023 (1)
   * ▼  February (1)
     * The Writing's on the Wall

 * ►  2019 (5)
   * ►  February (2)
   * ►  January (3)

 * ►  2018 (12)
   * ►  October (1)
   * ►  September (7)
   * ►  August (1)
   * ►  July (1)
   * ►  February (1)
   * ►  January (1)

 * ►  2017 (13)
   * ►  October (2)
   * ►  April (1)
   * ►  March (3)
   * ►  February (7)

 * ►  2016 (25)
   * ►  December (1)
   * ►  November (2)
   * ►  October (2)
   * ►  August (4)
   * ►  July (2)
   * ►  June (5)
   * ►  April (1)
   * ►  March (2)
   * ►  February (3)
   * ►  January (3)

 * ►  2015 (78)
   * ►  November (1)
   * ►  September (8)
   * ►  August (4)
   * ►  July (6)
   * ►  June (3)
   * ►  April (8)
   * ►  March (11)
   * ►  February (14)
   * ►  January (23)

 * ►  2014 (69)
   * ►  December (1)
   * ►  October (3)
   * ►  September (6)
   * ►  August (8)
   * ►  July (1)
   * ►  June (4)
   * ►  May (5)
   * ►  April (3)
   * ►  March (8)
   * ►  February (18)
   * ►  January (12)

 * ►  2013 (86)
   * ►  December (3)
   * ►  November (10)
   * ►  October (10)
   * ►  September (7)
   * ►  August (4)
   * ►  July (7)
   * ►  June (9)
   * ►  May (8)
   * ►  April (5)
   * ►  March (2)
   * ►  February (7)
   * ►  January (14)

 * ►  2012 (162)
   * ►  December (6)
   * ►  November (14)
   * ►  October (15)
   * ►  September (10)
   * ►  August (7)
   * ►  July (16)
   * ►  June (21)
   * ►  May (11)
   * ►  April (15)
   * ►  March (24)
   * ►  February (20)
   * ►  January (3)

 * ►  2011 (17)
   * ►  November (2)
   * ►  August (1)
   * ►  July (1)
   * ►  May (1)
   * ►  April (4)
   * ►  March (6)
   * ►  February (2)

 * ►  2010 (43)
   * ►  August (2)
   * ►  July (4)
   * ►  June (4)
   * ►  May (4)
   * ►  April (4)
   * ►  March (15)
   * ►  February (6)
   * ►  January (4)

 * ►  2009 (27)
   * ►  December (10)
   * ►  November (15)
   * ►  October (2)




FOLLOWERS




CURRENTLY READING:







Awesome Inc. theme. Theme images by blue_baron. Powered by Blogger.



Diese Website verwendet Cookies von Google, um Dienste anzubieten und Zugriffe
zu analysieren. Deine IP-Adresse und dein User-Agent werden zusammen mit
Messwerten zur Leistung und Sicherheit für Google freigegeben. So können
Nutzungsstatistiken generiert, Missbrauchsfälle erkannt und behoben und die
Qualität des Dienstes gewährleistet werden.Weitere InformationenOk